1.Light weight: specific weight is only 325~725kg/m, only 1/4 of concrete, 1/3 of clay brick, known as concrete floating on the water. The design value is 650kg/m

2.Good thermal insulation performance: the minimum thermal conductivity (BO4 level) is 0.114, the insulation effect of 125mm thickness material can reach the ordinary 370mm thick brick wall. It is a new building material that can achieve more than 65% of building energy saving by a single material.

3.Good fire performance: 100mm thick plate can reach 3.62 hours, 125mm thick that can reach more than 4 hours.

4.Good sound insulation performance: the sound insulation index of 100mm thick board (double-sided putty) reaches 40.8dB (through loss).

5.Good seismic performance: can adapt to the large interlayer angle shift, allowing the interlayer shift angle 1/150, the use of special points to 1/120, and in all cases of joints in the interlayer shift angle 1/120 will not produce the plate off the situation.

6. Good environmental performance: no radiation, its hourly exposure is 12y n / h, equivalent to the level of outdoor grass.

7.Strong load-bearing performance: The panels are equipped with double-layer and bi-directional steel mesh inside, which can be used as exterior wall panels, partition panels, roof panels, floor panels, decorative panels, etc.

8.Good anti-cracking performance: ALC board is reinforced by rust-proof treated steel reinforcement, which is made by high temperature, high pressure and steam maintenance, and has the smallest shrinkage ratio among inorganic materials, and is embedded with special polymer binder to effectively prevent cracking.

9.Convenient construction: ALC board is processed by the actual measurement on site after sizing, and is a factory prefabricated product with high precision, which can be planed, sawed and drilled. It is easy to install and simple to work with, eliminating the traditional wall construction column, waist beam and plaster, and directly scraping the putty, greatly shortening the construction period, improving the efficiency and construction quality.

10.Good economy: Using ALC as wall material can effectively improve the usable area of the building, reduce the energy consumption and reach the national building energy-saving standard. Under the same sound insulation and fire prevention requirements, the thickness of ALC panel is the smallest, and there is no need for auxiliary components such as structural column and waist beam, which can reduce the wall load and thus reduce the construction cost.